Can anyone advise on this?
Our two 175W solar panels are correctly connected and the MPPT 100/20 is showing a blue light. We have an auto electrician here helping and he can't work out the problem either.
The electrician says the way it is set up it will only power devices that are wired from the LOAD on the MPPT, but obviously the reason we want solar is to charge the leisure batteries when we are off-grid and not driving.
The MPPT is not appearing on the Victron app (the other two products are in the app). So I cannot access any settings from the app. Is it likely the MPPT bluetooth is faulty?
Our wiring diagram attachedNomadic Energy wiring diagram.pdf doesn't seem to show how the charge controller will power up our leisure batteries.
Are we doing something obviously wrong?
The Victron troubleshooting guide doesn't seem to be helpful here.
Thanks
Alex