question

philipb avatar image
philipb asked

Victron connect app 5.7 Smart Solar Trends settings

Hi, I have recently purchased a MPPT 75/15, I am using a iphone running Victron connect 5.7, connected via Bluetooth, when I am in Trends, if I change the graph headings they do not seem to save, as next time I open the app or the app reconnects, the headings default to Solar Voltage & Solar Current. Apart from that the App is excellent.

Also I wondered if it would be possible to show the amount of charge in the battery, perhaps as a percentage?

Thanks

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
adev avatar image
adev answered ·

For battery state of charge, a separate Battery Monitor (with shunt to measure current) is the victron way. However if the laod terminals on the smaller SmartSolar controllers are used it would be very simple for a software update to add battery state of charge. This would be really great.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.