I'm looking to add an inverter charger to my boat. I have a Victron Multiplus Compact 12 | 2000 | 80 - 50. The boat has 2 shore power connections and one is labeled for the air conditioner. The boat also has a generator. The shore power inputs are both 110V 30 amp connections. The generator is also 110V.
The AC panel has 2 switches. You can see them labeled SHORE and GEN and AIR COND and GEN. Ideally I would like to wire my shore power and my genset to the AC input on the Multiplus via a AC transfer switch. That way when I'm on shore power, genset, or batteries the Multiplus would give me AC when needed. This would be easy with only one shore power line, but with 2 I don't know what to do.
Any suggestions on wiring the 2 110v shore power to the Multiplus?
Is there a way to parallel the 2 shore power inputs?
Should I just wire the shore power and genset into the transfer switch and operate the AIR COND by manually flipping the switch and turning on the genset? I don't plan on using the air conditioner unless the genset is running, since it would probably drain my batter too quickly.
Thanks,
Bobby