Simple ESS Question:
Pylontech US5000 connected (which is a 15s battery) with the CAN port. Everything works perfectly.
Now the Pylontech was expanded by a second offbrand battery pack in parallel. Everything works as expected but I want to set the Battery current sensing source as the DC current of the MultiPlus II and not the batteries BMS values.
Since a second pack is connected in parallel the charging power and amps is off by a factor of 2. Discharge limit is working correctly since that is limiting the AC feedback of the Multiplus.
Summary:
I want the Battery current and power to equal the DC current the Multiplus is measuring and not the values from the pylontech CAN BMS.
Is there a way to set that as the source for Battery:
Instead of the CAN BMS?