question

Val Vechnyak avatar image
Val Vechnyak asked

Orion LiFePO4 battery profile

When using Connect app for the DC to DC Orion 12|12-30 charger, I am selecting Smart Lithium profile but it still shows float and absorption stages. I critically do not want any of the absorption or float stages for my LiFePo4 bank. I would like to only have bulk. Could someone please help how to configure this?


Thank you

orion-tr smartorion dc-dc
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvas avatar image
mvas answered ·

Can you edit the presets?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Val Vechnyak avatar image Val Vechnyak commented ·
Yes but not to disable those two stages
0 Likes 0 ·
kevgermany avatar image kevgermany ♦♦ Val Vechnyak commented ·
You can't disable them. Just set absorption to the charging voltage. If you wish, shorten absorption time. Float voltage can be set a little below absorption, this affects when the charger will restart so don't go too low
0 Likes 0 ·