My application is for a marine house battery bank. Its a full Victron setup with Multiplus 3K, two 200Ah LiFeP04 batts, batt protects, MPPT, VE.BUS BMS, CCGX, Digital Display, BMV712. Everything is working properly except the Orion 48 12 20 240W unit. I have + and - Input coming from the battery. I made tiny adjustment to potentiometer. I have the right hand terminal of green connector going to the Balmar 614. Output + going to starter with external fuse, and Output - going to starter battery. Can't get the Orion DC DC to power on. Tried two separate units and nothing. Manual has no further guidance, and have not been able to find guidance in the community yet. Appreciate any assistance from the gurus out there.