I am busy with a new set up, which consist of:
Mutiplus II 48/5000/70
x2 Blue Nova BN52V-100-5.2K BP Lithium batteries
Cerbo GX
Batteries connected parallel as per manual. CAN 1 on master connected to Cerbo BMS-CAN port, with only pin 7 & 8 in cable connected. Second BMS-CAN port has terminator. CAN 2 on master connected to CAN 1 on 2nd battery, and terminator in CAN 2 of 2nd battery. Multiplus connected to VE BUS on Cerbo.
In VRM Portal, I can see the Multiplus on the device list of the Cerbo. BUT I CANNOT SEE THE BLUE NOVA BATTERIES!! What do I have wrong?
The Multiplus is happily charging/inverting to/from the batteries.