Hi all
can anyone tell me why i can only see one set of data from one of three BMV702's on influx.
for example:
/Dc/0/Voltage <- V DC
/Dc/0/Current <- A DC positive when charged, negative when discharged
/Dc/0/Power <- W positive when charged, negative when discharged
/Dc/0/Temperature <- °C Battery temperature (BMV-702 configured to read
temperature only)
/Dc/0/MidVoltage <- V DC Mid voltage (BMV-702 configured to read midpoint
voltage only)
/Dc/0/MidVoltageDeviation <- Percentage deviation
/Dc/1/Voltage <- V DC - Starter voltage (BMV-702 configured to read starter
battery voltage only)
/ConsumedAmphours <- Ah (BMV, Lynx BMS).
/Soc <- 0 to 100 % (BMV, BYD, Lynx BMS)
/TimeToGo
this is all i'm getting from influx.. its unclear which BMV its showing.
all three are visible on the 192.168.xx.xx/app page.
mqtt is on.. 3 units on an rpi running victron.. another local rpi with influx & grafana
any help gratefully received