This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Multiplus 24/3000 and a Lithium battery, and would like to add basic battery monitoring (Voltage, Ah remaining, SOC) and display this in the Victron Connect app.
This is in a camper van, so there will be house DC loads outside of the Multiplus.
Will the VE Bus Smart Dongle work for this (and thus not requiring a BMV for my small setup) ??
No, you require a BMV for the system to accurately recognise DC loads and charge.
The MultiPlus (and adapter) is only aware of AC loads and AC Charging for its state of charge features. Inclusion of a charge controller would also require a GX device, which is connected to both the MultiPlus and the MPPT to keep track of charge.
If I have a Victron Smart Battery, Smart Shunt, Smart MPPV, Multiplus with Smart Dongle do I still need a BMV
The smartshunt would give the same functionality as a BMV, Without the extra display
There is a SmartShunt that is BlueTooth capable now that will allow you to do all the checks via the VictronConnect app. The cost to add one would probably be the same as the BMV though.
I want to jump in here if I may.
I have a 12/1200 Multi, a Smartsolar 100/20 and a Blue Nova 4KWh lithium battery.
I want to add a BMV712 to monitor the system, mainly to see SOC.
I get that without adding a GX device the Multi will be sort of excluded from the network, but will I at least still get a accurate battery SOC reading for the system including the current drawn by the inverter and charge coming in from the grid even without a GX device?
This is how I understand it, I don't want to add a GX device, it will be total overkill for this setup, all I want to achieve with the BMV is to see a accurate SOC on this system.
Yes, adding just the BMV will give you the information you require.
Adding a GX device (or Pi with Venus installed) would allow a full overview of the system and nicer data logging.
