Good Day,
I have an solar site. No Inverter is connected. I have an Cerbo GX. The charger is an Smartsolar MPPT 150V50amp. The battery I'm using is 4x Hubble AM2's. I have a Hubble Cloudlink connected to the batteries. The Cerbo GX is connected to the Cloudlink via a VE.Can to CAN-bus BMS Type B cable. The Cerbo GX does not pick up the battery under device list. The VE.Can to CAN-bus cable is plugged into the Cloudlink CAN port and into the Cerbo GX VE CAN port. I am in contact with Hubble support but they mentioned normally they have Victron inverters setup this way. Have anybody experience in setting this up or know why the battery does not shoe under device list?