The solar charger power very unstable, The MPPT is smart 250/100 VE.CAN, the SOC of house battery is 70%. What is the reason ?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The solar charger power very unstable, The MPPT is smart 250/100 VE.CAN, the SOC of house battery is 70%. What is the reason ?
When the state is "Foat", the charger is very small. When the state is “External control”,the charger power is high. I don't understand why the state is changed every some seconds ?
If it is communication problem ? But there is no alarm on GX touch panel.
You need to see if the entry on the GX is disappearing, it won't generate an alarm. Might be a bad cable. Make sure you aren't using both a cable and smart networking, these can conflict and aren't intended to be used together.
Additional resources still need to be added for this topic
42 People are following this question.