This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have the Victron Quattro 48/10000 inverter, and I am trying to charge batteries with Husqvarna G5500P generator (5.0kW (50Hz)). I can only lower the Generator Current Limit to 10,5A (default setting was 16A). It rejects the power of the generator on this setting. Can I use the Husqvarna G5500P generator with the Victron Quattrol 48/10000?
Yes you can, but I used a SDMO HC6000 mean 6000VA or 4800W, but if I connect it to my MultiPlus-II 24/5000 then I heat, that at a load of 3800W the Generator start working harder.
You should not give a load of more then 60% on the Generator, if you have to charge batteries (probably over several hours or even like me 36 hours)
