This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Have just tried to charge a lithium iron phosphate 100ah battery with the above. It getting extremely hot and shuts off after about 30 seconds, it cools down and comes back on then shuts down again . The battery is 57% charged and is showing the charger is producing 14.7 amps. Have tried the charger in li-ion and normal modes with no difference.
One other thing do victron do a bulkhead fitting to connect the charger leads to as once the battery is installed in the van its a pain to get to?
It's a 15A charger, so the 14.7A is ok. What settings do you have in the charger?
If the battery is getting too hot, and the charge rate is within the battery limit, then probably a faulty battery.
Can't help with your last question.
The battery is cold it’s the charger is getting hot.
The charger isn’t working long enough to get the Bluetooth connecte, so have set the mode to 14.4 volts which made no difference
