question

mike-r avatar image
mike-r asked

Signal K not reading N2K connection

img-3863.png

img-3865.png


I am fairly certain I must be doing something basic wrong with my attempt at getting N2K data to be read by signal K but I can’t seem to nail down what I’m doing wrong. Here is what I have done:


I have had an N2K connection to my Cerbo for a long time and read in various fluid levels (as shown in the photo) without any issues. I can see that the connection is working (data transferring back and forth in services. And the correct 250 kbit/s setting is selected.

Installed OS Large V 3.10~8 on my Cerbo

Enabled Signal K

Accessed the signal K site via VRM.

I connect to the signal K server but I do not see the “n2k-on-ve.can-socket” as a connection.


I have rebooted several times but do not see any change. Ideas on what I might be doing wrong?

NMEA 2000 - N2KSignalK
img-3863.png (887.0 KiB)
img-3865.png (500.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic