question

mcfast avatar image
mcfast asked

Can't fit 6AWG Cable into 100|50 MPPT Charge Controller

Hi,


I am trying to connect 6AWG cable into my Victron 100|50 MPPT charge controller.


There is no way I can fit this cable into the connector on the charge controller.


Any help would be appreciated.


I am pushing out the 50AMPS from the charge controller to a 24v battery bank (Lifep04) and the wire length is less than 2ft.


Douglas.

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
hias0815 avatar image
hias0815 answered ·

Try something like this.

1686510078349.jpeg


1686510078349.jpeg (8.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.