Hello,
Looks like I cannot pair by bluetooth with my MPPT Bluesolar charge controller 150/60 TR.
Configuration : Macbook Pro 15' mid-2012 with Mac OS 10.13.6 (High Sierra) + Bluetooth 6.0
VE-direct bluetooth smart dongle.
I'm in an isolate site (no internet).
Troubleshooting : I checked the troubleshooting section for the last 3 days. I read a lot of threads and questions concerning differents issues the community encountered. But I got no real solution. I unpaired and deleted the VE-direct device on my bluetooth system configuration window before every attempt to connect with VictronConnect, I also cleared the pin code. I ONLY connect bluetooth with VictronConnect which release is up-to-date. No other bluetooth device can cause the issue. I always attempt to connect bluetooth within 30 seconds after pluging the dongle to the MPPT. I also reseted the bluetooth parameters on my computer. Nothing changes.
Issue : The firmware passes correctly. The dongle leds blink like they should. The MPPT led bulk is blinking correctly.
But when I try to pair the VictronConnect app with the dongle, it asks me the usual pin code at 20%, then gets stuck to 80%, then goes back to 20%. And, after what it looks like 4 or 5 attempts, I have an error message (see the pics).
Can you tell me what I did wrong ?
Thank you !
Then :
And then :
("Impossible connection, delete the device from the paired devices list, and connect again...")