question

harveyhall avatar image
harveyhall asked

My new Phoenix 12/1200 inverter shuts down after 30 seconds into turning on.

I have 1 year old set of 4 x 6 volt deep cycle batteries approx total 425 amp capacity. Small loads are running fine but the microwave 1100W line low and 700W continues to shutdown the inverter. From what I can fine online I need to change the Dynamic Cutoff Levels on the app. But what are these setting that I need to change? Or am I on the right track? Thanks in advance.

Phoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Michelle Konzack avatar image
Michelle Konzack answered ·

Your Phoenix Inverter has 1200VA and not Watt.


The Microwave with 1100W is too big for this Inverter. My Panasonic Microwave has 1200W, but if I look at the ColorControl GX then I see, it suck 1480W!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.