question

René V. (Sereen) avatar image
René V. (Sereen) asked

MPPT 75/15 AES load output setup

I have an 75/15 smart MPPT but i cant get the AES function on the Load output setup. It does switch on after going past 12.48V and turn on the Load ouput. However after reaching 12.45V it doesn't turn off the Load ouput as i would suspect.

And according to the manual i would not need the jumper so this is unplugged.

Any tips on what i'm doing wrong? Or does it work in another way then i think it would?


1.jpg

2.jpg

aes
1.jpg (38.3 KiB)
2.jpg (37.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
René V. (Sereen) avatar image
René V. (Sereen) answered ·

i've upgraded the battery (and settings) with a 24v battergy and now this option does work as intended.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic