question

stevew avatar image
stevew asked

VE.Bus BMS and standard 15amp 115 volt receptacle

Greetings from Southern California !!

A hair-brained idea:

Has anyone considered - or perhaps even designed the circuit - to use the high/low signals from the VE.Bus BMS to trigger a relay to energize / de-energize a standard 115 volt receptacle??

I’m thinking of such a device to control a non-victron battery charger / converter. Mostly just to de-energize the device if the BMS is unhappy with an individual cell.

Thanks !!

SW



battery chargingBMS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvas avatar image
mvas answered ·

Yes, with the correct relay, you can control the 120 volts from an AC outlet.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.