question

Lars Lindegaard Mikkelsen avatar image
Lars Lindegaard Mikkelsen asked

MultiPlus charged from grid (HUB-2 v3)?

We are testing a 3 phase offline MultiPlus 48/3000/35 system.

Issue: The system started to charge batteries at 03:00 at SOC = 48%?

Conditions:
- Load: OFF
- Grid: ON
- PV: OFF
- Not day 1 or 7 in repeated absorption mode.


Following 3 assistants are installed in all inverters:

Hub-2 v3


Relay (use to control non critical load)


Relay



VRM portal



Is it possible to attach the configuration file?


Best Regards,

Lars Lindegaard Mikkelsen

MultiPlus Quattro Inverter Charger
1559901061173.png (38.0 KiB)
1559901219504.png (9.2 KiB)
1559901229468.png (9.2 KiB)
1559901554220.png (26.0 KiB)
1559901913583.png (26.8 KiB)
1559902115311.png (27.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Lars Lindegaard Mikkelsen

Your question was very vague, with no information about battery voltage and other conditions.

Did you fix your issues?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.