question

garnet avatar image
garnet asked

BMS2 and DVCC

Does anyone know how to detect Victron bms v2 in dvcc?

img-0303.jpeg

My ve.bus paths I’ve tried are;

MP->MD->BMSv2->GX->DMC

MP->MD->BMSv2->GX

All firmware meets or exceeds minimum requirements.

BMSVE.BusDVCC
img-0303.jpeg (64.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Rob Fijn avatar image
Rob Fijn answered ·

I believe this goes automatically, as the Firmware in the Mulitplus/Quattro detects that there is a VE.BMS on the VE.Bus available. ( as of some time now it is not needed anymore to load the assistant for this )

Rob



1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

garnet avatar image garnet commented ·

Ok, Thank you.

I can confirm that the Multiplus is indeed communicating with the BMS v2.

I assumed that it would pop up as a BMS agent in the DVCC section.

0 Likes 0 ·