I have a Victron MPPT75/15 with 2 Exide ER350 service batteries (80+80 AH) and 1 Exide ER350 starting battery. I have a 200W solar panel.
Problems:
1. There is no factory configuration for these lead batteries in the MPPT app. Also it’s nowhere to be found, similar questions point to unexisting sites
2. When I attach 220V from the berth the batteries do not seem to charge, the I start the engine with the alternator and the charge goes to 100%….
This behavior did not show before I installed the MPPT75/15…
Thanks in advance for your help!!
