question

wrightmoment avatar image
wrightmoment asked

Are my readings correct when Battery is fully charged?

Will my readings from the Bluetooth Victron 100/30 be accurate if the battery system that it supplies is at 100%? It seems to produce near capacity AmpHrs when the battery is charging, but cuts back in similar conditions when the battery if fully charged

victron products
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
markus avatar image
markus answered ·

Hi,

yes, this is how it should be. The battery can only save limited amount of energy. When the battery is charged and you have no other energy consuming loads, the panels full power is not used and therefore the Amps/power from panels will decrease the more the battery gets charged.

When the Battery is completely full and all loads are off, power production should even go near zero.


Regards,

Markus

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wrightmoment avatar image wrightmoment commented ·

Markus

Thank you for verifying this

Wonderful to have such an accurate measurement. Find it really helpful if out for several rainy days.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic