Need some help with assistants on my Quattro. my objective is to have AC 2 OUT power when SOC is greater than 98% and turn off below 90% SOC when I'm at anchor. However, I want AC 2 to power ON whenever Genset or Shore is connected regardless of SOC. Below are the assistants I am using but when on shore or Genset AC2 OUT is not powered until above SOC 98%. I thought multiple conditions were OR not AND statements. Any help on how to achieve what I am after much appreciated.
1st assistant
- Use AC Out 2 relay
- Set relay on
- when any AC available for 10 seconds
- when SOC higher than 98%
2nd assistant
- Use AC Out 2 relay
- Set relay off
- when any AC not available for 10 seconds
- when SOC lower than 90%