Hi,
does anybody know how to get the Critical Loads to displayed in the Remote Console Correctly. For me it's not showing up.
But in the VRM Online Portal it shows up:
The setting in ESS (AC out in use) is activated for AC out. Removing it disables the critical load window in the online portal but it has no impact on the remote console (enabled or disabled).
I do use a Energy Meter on AC In. There are two PV Inverters connected to the Critcial Loads (AC Out 1) Unfortunatly I can't get the second one to show up correctly (Solax Inverter).
Kind regards
Udo