question

simonkeeligan avatar image
simonkeeligan asked

AC OUT 1 and AC OUT 2

gx.pngHi all i am new to the equipment, i have the Multiplus ii 10K and i would like to show the AC out1 and AC out 2 power separately on the GX, i have installed another ET112 on the AC out 2 and it is showing the Immersion heater power in the advanced tab of the web browser but i would like to have it displayed separately in the GX as it looks like im drawing a lot of power from the critical side. can anyone help?

ac out 2
gx.png (43.1 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw avatar image ejrossouw commented ·

I don't have an answer. The modifications space may be a good place for this? The ET112 can be renamed and show as e.g. ACOUT below.

1681543505631.png

0 Likes 0 ·
1681543505631.png (123.2 KiB)
marcve avatar image marcve commented ·
Critical Loads are the loads that run through the inverter. AC loads, are the loads on the AC OUT that will be disconnected when Grid fails.
0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic