question

Dries Oosthuizen avatar image
Dries Oosthuizen asked

MPPT RS Aux Input programming

We want to use the Auxiliary Input ports of an MPPT RS 450/200 to monitor the status of an external switch contact.
Ackording to the online manual the Aux Input is programmable through VictronConnect, but I cannot find that function when connected to the MPPT through VictronConnect.
I have tried connecting through the VRM section in VictronConnect recently, and through Bluetooth from within VictronConnect when the MPPT was installed a few months ago.
Am I just missing it, or has this function not yet been added?

Thank you in advance.

VictronConnectmppt rsaux
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Dries Oosthuizen,

Apologies, this is an open issue and will hopefully be resolved soon.

Aux Input controls are currently available for the Multi RS (see VictronConnect demo mode), but not yet visible for the MPPT RS.

I will post back here once they have been added.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources