question

phong le avatar image
phong le asked

Easy Solar and BYD installation issue

Hi there.

My solar sparky tried connecting and configuring my Easysolar (48/5000/70-100 MPPT150/100) and BYD (B-BOX Res 10.24kwh) and 12 Qcell panels setup but had the following issue:

"There is a slight short from Negative on the battery isolator to Positive on the inverter DC battery bus of 148.7 Ohms."

He can't seem to find support from anyone so i was hoping someone here could assist?

Thanks

Phong



EasySolar All-in-OneBYDinverter current draw
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
byd-service avatar image
byd-service answered ·

Hello,

Have you confirmed if the short is on the battery or inverter side?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

phong le avatar image phong le commented ·

Thanks. Sparky says the short is on Inverter, batteries work fine until connected to the inverter.

Cheers

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Victron BYD battery compatibility guide

EasySolar 1600 product page

EasySolar-II GX 3000 & 5000 product page