question

miles-trotter avatar image
miles-trotter asked

Victron Super Cycle AGM 125Ah

Hey there,


Looking to setup my orion dc-dc 30a, 75/10 mppt and multiplus 1600VA (ALL 12V) with my battery bank (2x Super Cycle Victron AGM 125 Ah batteries) and need the following info as can't find it all on the battery info pdf -


Absorption Voltage:
Float Voltage:
Equalization Voltage:
Re-Bulk Voltage offset:
Absorption Duration: (Adaptive/Fixed)
Maximum Absorption Time:
Tail Current:
Equalization Current Percentage:
Automatic Equalization: (Disabled / Equalize every ____ Days)
Equalization stop mode: (Fixed Time / Automatic on Voltage)
Maximum Equalization Duration:
Temperature Compensation (mV/°C):
Low-Temperature Cutoff (optional):

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

There are default settings, but most AGM values will work.

From memory

14.4/13.7V

Set equalisation to absorption as a safety measure, but don't use it.

Rebulk, leave at default, unless you have problems

Absorption adaptive

Leave the rest on AGM defaults.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.