question

blueface-mac-bluejuice avatar image
blueface-mac-bluejuice asked

Trying to configure streetlight setting to save energy at night

Hello,
I have a system with a SmartSolar Mppt 100/20 Charger which I would like to configure in way that the refrigerator, connected to "load" turns of for a while at night to save energy.
For that I have configures the "load" setting via the VictronConnect app with ( off < 12.00V on < 17.39V < off )
That works as intendet.
Now I also configured the "streetlight" setting to:

Sunset: Switch on for a fixed time ( 5h )

Sunrise: Switch on before sunrise ( 1h )

Sunset detection: 11.40 V
Delay: 0m
Sunrise detection: 11.9 V
Delay: 0m

Gradual dimming speed: 0s/%
Mid-point shift: 0m

However with these settings the fridge does not turn on.
Current values are
PV Voltage: 16 V
Battery Voltage: 13.5 V

Why is this not working?

Thanks a lot for all help

Streetlight
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
anthony avatar image
anthony answered ·

Have you read the 'Notice' under section 5.2.3 below:

https://www.victronenergy.com/media/pg/Manual_BlueSolar_MPPT_75-10_up_to_100-20/en/configuration-and-settings.html#UUID-6e06ab85-0045-b156-b63c-1f21f83f1b62

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

blueface-mac-bluejuice avatar image
blueface-mac-bluejuice answered ·

Are you referring to the jumper removal? That has been done of course.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic