Hello the community,
I've been struggling with an passthru issue with my EasySolar II GX.
Here is how it works at the moment: During early morning, Passthru is "active". When first light occurs, the battery start to charge. Then, the system goes to absorbtion and start to invert to push on the grid. Later during the day, the battery start to discharge (therefore limiting the power from the solar panels due to the inverter capacity).
At the end of the day, the system never use the battery as it stays in passthru, even if the battery is above the minimum SOC.
Hera are the bus state for yesterday
On these charts, we can see the battery discharge during the day, and the PV yield limited (first spike then skipped at 2.2k
After reading other posts / manual, I've reconnected the powermeter and the shunt, but no change occurs. They are all displayed alive (and kicking) in the remote console
Here is how I would like my system to operate:
- at first light, first use of the solar power
- store excess power to batteries if can not be consumed
- when batteries full, inject to grid all the possible solar power
- when solar drop down under consumption, use batteries as support until min SOC
Many thanks for your help :)
