This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a system with 2 Smartsolar MPPT 250/70 for different PV strings. For additional PV-Strings I would like to add a MPPT 250/100 which would be connected via the exisiting USB-HUB together with the two existing MPPT 250/70 to the Color Control GX. Is this ok to be managed jointly by the BMS (Pylontech LIFE)?
You can mix as match, as long as they are connected via CAN/vedirect it doesn't matter.
CAN ports might restrict this a bit as ve.can runs at 250kb and the BMS at 500kb, so if you don't have one of each, then you're a bit stuck.
