Hello.
Does any one can tell me if it is possible to lower de AC1 or AC2 input limits bellow 16A on Victron 48/15000/200-100/100 ? I change the configuration with VEConfig to 10A or even lower, but the minimum real value obtained is near 16A. The problem is that the mains connected in AC2 input have a breaker limited to 15A and it trips after some time. The system is working OK, but this limitation is quite a problem.I have upgraded the firmware to the 2656502 version but I did not obtained any significant change.
Question: Is it possible to lower the real AC input current on AC1/AC2 inputs bellow 16A on Victron 48/15000/200-100/100?
Thanks!
Joao Capelao