question

jonny-b avatar image
jonny-b asked

Multiplus II T-sense Cable & Pylontech Batteries

I have a Multiplus II that I'm currently rigging up to my 2 Pylontech US5000 batteries. The instructions say connect the supplied T-sense lug terminal to the battery's negative terminal. This isn't possible on the Pylontechs as their terminals are different. Where should I connect it instead of the battery negative terminal?

installation
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

You don't need the T-sense because the battery is sending it's temperature to the system via Can bus.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic