This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi new installation and while testing the bms is reaching 81.4 deg celcius when a 200-300 amp load is applied to the system.
The cooling fans are not turning on.
When i charge the batteries with a similar charge rate then the fan does turn on and cools the bms,
any thoughts??
Contact the dealer. Sounds like it needs testing/replacing.
But you say fans come on. Which fans?
the two fans inside the lynx bms next to the contactor turn on but only when charging batteries.
