Hi all,
I have a self installed Multiplus-II with Pylontech batteries which I've tried setting up with the ESS Assistant via VEConfig, following these instructions: https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom#dokuwiki__top, but when I go to the Crebo GX, it shows 'No ESS Assistant Found', no matter what I try.
I have micro inverters connected to the AC-Out1, so no external sensor is required, according to the documentation.
I'm finding it impossible to find anyone local to do the final configuration, so the question is, is there anyone on here that could do it please?