question

echidna avatar image
echidna asked

Instant readout parameters for Phoenix inverter

I was just trying a Phoenix 12/500 inverter with a VE.Direct to Bluetooth dongle, and while this works well in the "logged-in" mode, the instant readout only displays the battery voltage and inverter state (inverting/searching/off).

Since there are only two other parameters available for readout (in the "logged-in" mode) from this device, namely the AC voltage and the % load, could these not also be included in the instant readout?

In particular, the % load is perhaps the most useful parameter to be able to see.

Bluetooth Low Energy - BLE
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic