Hello! My system seems to be physically working fine, but the reporting from the VictronConnect app seems a bit off.
The LED on the SmartSolar shows that I'm in the bulk charging mode, but the VictronConnect app shows things in Absorption at a tiny current (0.5 A). My BMS however shows that I am indeed getting a more reasonable current given the conditions.
Additionally, the VictronConnect app shows the battery side voltage as 14.60 V, where my multimeter at the MPPT battery wiring, and BMS both agree that the voltage is at 13.2 V.
Where should I begin looking first to try to understand why the VictronConnect app is in disagreement with what I'm measuring and seeing reported elsewhere?
I've found a few posts that touch on the voltage issue, but haven't found any posts that deal with the mismatch in charging stage LED vs VictronConnect app issue.