Hello everyone,
i have a newly installed setup in our boat.
We installed a cerbo gx, a quattro 24/5000/100, Lynx distributors, Lynx powerin, Lynx Shunt, 2 x 200AH Lifepo4 24v, an VE.Bus BMS V2 and an Smartsolar 150/35 together with 2 540W Panels.
The System works very well, as expected.
But I am not able to switch the Quattro in any mode remotely.
In node-red I cannot use the VE.Bus Controller to changer the switch setting. I can see that the Setting ModeIsAdjustable is 0.
What I want to achieve is the following:
I want to run the System as inverter from 100% SoC to 50%SoC then I want it to charge the batteries. But I want it to stop at 80% SoC so that the sun can handle the rest the following day.
I was thinking that I might be able to achieve that via node-red an setting the mode to inverter only once 80% SoC ist reached when charging.
But it doesn't seem to be possible, at least for me.
Anyone did the same already oder can help in any way?
Thanks a lot
Tom