question

roger-1 avatar image
roger-1 asked

Solar edge output not correctly reported in VRM

Cerbo Gx displays correct kW output from SolarEdge Se6000. But only a fraction of this is reported in the VRM data. So when I have actually generated, say 6kWh during the day VRM is reporting 0.2kWh.

All firmware upto current date

CerboGX. V2.93

Smart Shunt 500A. V4.13

Multiplus 2 48/5000/70-48. V502

solaredge
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
suggarman avatar image
suggarman answered ·

Do you have any other device connected to the solaredge? Solaredge can only handle one device. If data is needed, you have to get it from the cerbo.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Integrating with SolarEdge

Additional resources still need to be added for this topic