question

sparrot avatar image
sparrot asked

Too many connections for Cerbo GX

I have a system with 2 Skyllas, 2 Quattros split phase, and 2 CanBus enabled regulators similar to Wakespeed. The batteries are managed by 2 Lithionics BMS's that are canbus enabled. There are not enough connections on 1 Cerbo. How can I setup this system?

MultiPlus Quattro Inverter Chargercerbo gxSkylla
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
derrick thomas avatar image
derrick thomas answered ·

Can bus should be able to daisy chain.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ukxan avatar image
ukxan answered ·

New product range: VE.Can SmartSolar MPPTs - Victron Energy

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ukxan avatar image
ukxan answered ·

RJ45-splitter - Victron Energy

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image
Alexandra answered ·

@sparrot

With CAN is usually does not matter what is connected. Or shouldn't. So one battery could even tag onto that. Just terminate at the end.

The inverters are VE bus (daisy chained together) so a totally different port to CAN.

The batteries dont daisy chain like other ones?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.