question

boris avatar image
boris asked

how is that possible?

how is that possible bp-220 connected to charge and discharge?bp-220.jpg

howto
bp-220.jpg (671.4 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·

Hi @Boris

The lower unit in the pic is being used to control the batteries' charge. Note the comms connection to a bms.

From the datasheet.. "Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion
battery. See connection diagram in the manual."

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

boris avatar image boris commented ·
What about reverse current?
0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ boris commented ·
The BP for charging is connected in reverse.

Take another closer look and read the manual/look at the schematics in the manual.

2 Likes 2 ·
boris avatar image
boris answered ·

I connect the same way as on schematics , but for some reason BP on charge side fail or was defective from beginning, no idea now i am hesitating to connect another unit to test on charge side

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic