question

Greens Ledge Lighthouse avatar image
Greens Ledge Lighthouse asked

Wind Turbine Integration with Cerbo GX & SmartShunt

Hi all - Having used these forums for the research/planning, I wanted to share our successful experience with adding a 400W Wind Turbine (Primus Air Silent X) to our Victron-based solar power system and enabling remote monitoring capabilities via the Cerbo GX and VRM.

We installed this on Greens Ledge Lighthouse - which is about 1 mile off the coast of Norwalk, Connecticut. We have ~3kwh of solar capacity and wanted to add wind to help provide supplemental power in the winter months, given our abundance of wind resource.

To enable remote monitoring, we used a SmartShunt configured as a DC Energy Meter. We initially set it to "Wind Turbine" but this did not show up in the VRM (only accessible via the VictronConnect app and Remote Console).

When changed to "PV Charger" it showed up in the VRM alongside the solar panels, and this has been a good setup for us. We're able to see real-time production in VRM, see historical production via a device widget in VRM, and track the cumulative output via the VictronConnect app.

Production-wise - we've been monitoring it for about 2-3 weeks and are on pace to produce about 20kwh for the month. It has a steep power curve, so the vast majority of production comes when winds are in the 20-30mph range. We produced about 3-4kwh in a 24-hour period when we had ideal conditions.

When wind speeds are below 20mph or above 30mph - the output is generally minimal. However - the unit is not optimally positioned (about 20-30% of the wind is blocked by the lighthouse), so others may have better experience in lower and/or less turbulent wind conditions.

We're happy with the production and are considering adding a second and perhaps a third unit. We'll attempt to optimize over the coming season and report back any significant findings.

We post updates about the restoration work and the off-grid systems on our Instagram and Facebook if folks would like to follow us and/or ask any questions.

img-2825.jpgscreen-shot-2023-02-28-at-31445-pm.jpg

vrm.jpg

turbine-1.png



VRMSmartShuntHydro and Wind Powershowcase
img-2825.jpg (3.8 MiB)
vrm.jpg (254.5 KiB)
turbine-1.png (654.4 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

9 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Very cool!


What are those things below the wind generator? fog-horns?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ponzoa avatar image
ponzoa answered ·

Very cool and I appreciate your sharing. A schematic of the wind conenction would be awesome if you're willing to share that.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nesswill avatar image
nesswill answered ·

Good job.

Putting mine up this weekend. Will be setup the same as you have yours.(smartshunt ect...)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

thanar avatar image
thanar answered ·

Excellent work, are you open for visits? :)

A couple of questions:

How does the turbine connect to the rest of the system, prior to the Victron shunt?

Are you running each panel with solo, each with its own solar charge controller?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Very cool, thanks for posting :)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lasse Federley avatar image
Lasse Federley answered ·

Thank you so much. I am not at site now but in 2 days I am and I will tell you the result! Lasse

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lasse Federley avatar image
Lasse Federley answered ·

Choosing PV Charger in the smart shunt settings gives i a very poor box on the dashboard for the wind turbine. Only Watts are displayed. Guy Stewart (Victron Community Manager) Are there any improvements coming?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tedwad avatar image
tedwad answered ·

Any updates on this?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tedwad avatar image
tedwad answered ·

any one have a wiring diagram for the shunt wind turbine configuration

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.