question

nawir avatar image
nawir asked

Remote monitoring two separate three phase loads

I'd like to ask if anyone from the Victron community has solved this particular challenge.

I have two customers who have invested in a large shared system.

Its made up of

6 x 10Kva Quattro

2 X Fronius Eco 27

3 X MPPT 250/100

CCGX

5400Ah 48V OPzS Batteries

76Kw of PV


The system works well, each one has a kWh meter - (not smart) and they can see they consumption only if they physically go and read it.

They would like to see their kWh/ loads on VRM individually if possible. Can this be done by 2 x 3 phase Smart meters?

Can a CCGX be connected to 2 smart meters on the load side and allow them to be monitored via vrm?


Thanks


Nawir

Kenya

offgrid
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

The purpose of connecting an energy meter to a GX device is for it to provide feedback into the system. They have to be assigned one of three roles like: "Grid Meter", "PV Meter", "Generator".
It is not possible to connect a stand alone meter that is only there for viewing readings remotely.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Offgrid page