Hello
I want to suggest the introduction of another "Role" for Energy Meters in the CerboGX (VenusOS).
I would wish to be able to visualize certain special load devices inside of my home system which are part of house grid and at the moment summerized as "Critical Loads".
My setup:
I have a Varta Element 6 Battery connected on the AC-OUT side of the Quattro II system. Its connected with an EM24 between itself and Quattro (energy distributor is there as well). I have setup this EM24 as role "AC Loads" which is wrong, but better than nothing.
What I wand to add:
I am going to install a headpump in the course of the year.
What I want to achieve:
I would like to have "Critical Loads" split into "Varta", "Headpump" and "Remaining Loads"). Like you could say on a yacht you want to visualize certain high profile devices on the GX dashboard. Especially as Varta can consume but also emit energy.
Feature request:
Introduce a new role for energy meters which mark them device on the AC-OUT side and be visualzed as own icon/block on the GX dashboard. Calculation of loads wound then consider this to have proper energy-flow.
If there is a better place for suggestions (Git?) then please advice so.
I know it might be an edge case for most people, but I still think it would be worth a feature to have.
