question

Paul Perrin avatar image
Paul Perrin asked

Wifi disabled and wrong LAN network settings

Hello, While trying to connect my multiplus II GX 48/3000 to internet through my mac connection, I have manually changed the network settings for LAN (and I have deactivated the wifi before that). It seems I have no way left to connect to my Multiplus. Is there any way to reset to factory setting from where I am at? Thanks, Regards, Paul

TCP IP Networking
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·
@Paul Perrin

Try typing "venus.local" in a browser tab.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul Perrin avatar image Paul Perrin commented ·
It worked thanks! :)
0 Likes 0 ·
Alexandra avatar image Alexandra ♦ Paul Perrin commented ·
Awesome, glad it is sorted. Yeah that is what i meant, you had to be near it.
0 Likes 0 ·
Alexandra avatar image
Alexandra answered ·

@Paul Perrin

You will have to go on site. without any kind of router/internet connection there is no way.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul Perrin avatar image Paul Perrin commented ·

Thanks for your fast response, what do you mean on site?

0 Likes 0 ·
Paul Perrin avatar image Paul Perrin Paul Perrin commented ·
I have the multiplus on hand if this is what you mean. I could connect it to a router and connect to multiplus from computer through router? Even if I have wrong ip address in the multiplus ethernet config?
0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic