question

karlheinz-weber avatar image
karlheinz-weber asked

Multiplus II Firmware FW 2926 502 change to 3 Phases after load ESS Master goes on low Battery

Hello, upgrade system from one MultiPlus-II 48/3000/35-32 230V to 3 with 3 Phases. Config no errors. After load Assistent ESS on Master show "low battery". Firmware is 2926 502. VE BUS reset to single. Same Problem after load Assistent ESS "low battery". Test on all 3 Multiplus same Problem single. best regards Karlheinz Weber

ESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
karlheinz-weber avatar image
karlheinz-weber answered ·

Problem was wrong ESS settings, https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom is the Solution.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.