This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
An existing hybrid system with 2 x 5kVA Multiplus is having grid issues so we are looking at installing a separate Multiplus 3kVa connected to a generator in the charger only mode to charge the battery bank (40kWh LiFe4Po) manually (i.e. switch on the generator when low SoC and no grid). How is this connected to the GX device (Cerbo) in order to monitor?
I think you should just be able to configure the extra multi in charger only, And then enable DC-System in GX device. I dont think that monitoring would work because its an "incompatible" setup with other units
