VRM update time for Fronius Inverter

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Michael Schmidt asked May 25, '19

Hello i have a Fronius Inverter SYMO 8.2-3-M running with CCGX and Multiplus II.

The data is sometimes not really precise because of Fronius update time.

Is there a possibility to adjust the Polling time for the Fronius JSON enquiry?

best regards

Michael

Fronius

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-05-25T08:48:47Z

Paul B answered · May 25, 2019 at 08:48 AM

Hi if there is then you would need to contact Fronius as I think the setting would be on there end.

I maybe wrong but thats the first place I would start

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-05-25T09:41:07Z

Michael Schmidt answered · May 25, 2019 at 09:41 AM

oh no the JSON site is generated everytime new if you open them.

I think it is the Polling time from ccgx.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.