question

ryzho-serge avatar image
ryzho-serge asked

Multi RS smart 48/6000/100 + cerbo + pylontech (solar not feed in loads)

Hello! I have a problem with my installation on Multi RS smart 48/6000/100 + cerbo + pylontech us5000 . Solar power don't feed my loads, without using battery. But this is problem, because i need to keep a maximum reserve battery, and not use battery cycle. The Multi RS can do this or not? Or am I doing something wrong?

screenshot-1.png

screenshot-2.png

screenshot-3.png

screenshot-4.pngscreenshot-6.png


PylontechMulti RS
screenshot-1.png (43.4 KiB)
screenshot-2.png (45.4 KiB)
screenshot-3.png (10.7 KiB)
screenshot-6.png (24.6 KiB)
screenshot-4.png (59.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mr-no avatar image
mr-no answered ·

Since nobody answered up to now I will try as a customer with a Multi RS solar in usage. If I understand correctly you always want to have a full battery as long as there is grid power. Maybe you should try "ESS->ESS mode->Keep batteries charged". Once the battery is full, solar power should only feed your loads.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.